Thursday, September 10, 2009

Pre-Trip Preparations- August 1-4, 2009

Finally got the go ahead from Bill & Steve that they were comfortable that the boat would due well on our upcoming trip to Baltimore, MD. Went down to their marina on Saturday to pick up the boat, after getting help from our friend Bev in dropping my truck off at our marine and then her giving me a ride to where the boat was. I brought down the new galley countertop, sink and faucet and I was planning on doing this work after I brought boat back to her slip.

She ran fine from Waretown over to Barnegat, a short 5 mile run down the bay. Backed her into her slip, and got to work on the galley top. I spent allot of time getting the template/pattern just right, as the angles were all skew and nothing approaching parrallel or right angles. I was doing an overlay, so the existing countertop, less sink and overhang, would serve as the support for the new top. Had to open up the area for the sink and faucet, as I was changing it around a little.

Fortunately for me, my slip-neighbor, Capt. Steve, was down on his boat. He gave me a hand unloading the top from the truck, and bringing it aboard the boat. Once I made the preliminary modifications, he helped lift it up for the first dry fit. A few more slight modifications, a little silicone caulk adhesive, and 1-2-3 the granite is on. Boy, what a perfect fit!! No gaps anywhere. Steve hooked up the water lines while I finished off the seal between sink and under-counter. We both stood back and admired a job well done! Boy, is Alice gonna love this. While I did bring the other top and sink for the head vanity, I didn't have the faucet yet, plus it was running late. I decided to save this for another day. I had to head home because Alice works tomorrow and Jesse was going to a school dinner function. Once I dropped him off at the banquet hall, Alice & I would take a quick run back down to the boat to bring the new leather sofa. We had to dodge the growing storm clouds so that the sofa didn't get wet on the back of the truck. Good thing for me I didn't marry a 'delicate flower': she helped me unload the sofa from the truck onto the boat, then we took a few moments to take in all the new changes on board, before we headed home to pick up Jesse from his dinner.

Only two more days and I was getting antsy. Everything was coming together. Let's just pray for good weather. Nothing ruins a vacation on the water like rain.

Wednesday, September 9, 2009

Start of Mechanical 'Issues'- July 11 - 31, 2009

Well, it was bound to happen. After all the work done on both engines as well as the boat in general, over the winter, something was bound to go wrong. I thought that we had this all behind us, but the mechanical gods were annoyed at something, or somebody (me!).

Went down to the boat following the holiday weekend. Alice was working this weekend, so it was just Jesse and I; boys weekend. We decided to take her out for some time-trial runs in anticipation for our upcoming trip down to Baltimore, Md. My grandson, Tyler, was going to be celebrating his first birthday in August, and his dad was planning a big party. I decided to incorporate our vacation into the trip down to the party. We would leave Barnegat, travel down past Atlantic City on to Cape May, NJ for day 1. Day 2 would be across the Delaware Bay and River into the Chesapeake and Delaware Canal. Day 3 would be on into the Chesapeake Bay and down to Baltimore, MD and its Inner Harbor area. After the party we would return via a similar route.

I began the planning process early in July, researching available marinas and routes. I was hoping to travel down the ICW behind the barrier islands of New Jersey to Cape May, NJ thereby avoiding an exposed ocean run from Barnegat to Cape May Inlet, a distance of almost 85 miles. Depending on sea and wind conditions, this could be a great leg of the trip or pure hell. Taking the 'back road' down the bays and small inlets would offer a reprieve if the weather turned sour. Everything was being developed on paper, but I needed to know what to expect from the boat.

Jesse and I went down Saturday afternoon, having had a business meeting in the morning. Gotta pay for this lifestyle somehow!. We spent an uneventful evening on the boat and got up early the next morning. Left the marina around 8am, heading south along the ICW towards Manahawkin Bay and Little Egg Bay beyond. I was hoping to reach Atlantic City via the bay, and then take a return trip outside in the ocean and up the coastline. This way we can compare performance data and results on Vintage Viking.

We had a light breakfast underway. Navigating along the ICW through the numerous No Wake Zones (NWZ) along the LBI towns of Spray Beach, Brant Beach and Beach Haven caused us to take what seemed like an eternity to reach Egg Harbor Bay and the breakwaters of Beach Haven Inlet. This is a very misleading inlet, as it has shoaled over time and unless you are shallow of draft and/or very foolish you stay away. Further south is the intended destination of Atlantic City, home of NJ gamblers!. You can see the tall oceanfront buildings in the distance, and the construction cranes working on yet another gambling resort. Appropriately, I had a feeling of 'taking a gamble' with this trip. I hadn't traveled that far on the new engines. It was supposed to be a 42 mile trip each way.

We traveled down the back bays without much ado. I watched the FloScan to keep track of fuel consumption, and since much of this route is through NWZ's, we never really got much opportunity to open her up and see what she was made of. I took advantage of this slower pace to teach Jesse the basics of speed vs. fuel consumption vs. distance of travel in a given day. This would prove to be helpful in our planning of the Baltimore trip.

We made Atlantic City by 1:00 pm., roughly 4-1/2 hours from when we left Barnegat, NJ. At this rate, it would take us almost 9 hours to make Cape May, NJ, assuming Atlantic City is the halfway point of the 85 mile overall distance from Barnegat to Cape May. We stopped at Kammerman's Marina in Atlantic City Harbor, across from the State Marina and Trumpp's Resort. We took on fuel and water here, and met up with a couple bringing their vintage Chris Craft Constellation up the ICW from Virginia to New York. They were traveling 'outside' since Cape May and had the wind at their back. I asked how the trip was and the woman said she didn't know since she slept through most of it. Even though the Constellation was 20 feet longer and 5 feet wider than Vintage Viking, I deduced that if she could 'sleep' through the trip the sea conditions couldn't be that bad. I decided to venture out the Absecon Inlet and take to outside ocean route north to Barnegat Inlet. Paid the tab at Kammerman's and headed out.

Leaving the inlet, we got exposed to the southerly winds. Coming across our starboard beam, they gave us a slightly rough trip into the open ocean. Once we made it past the outer marker buoy and we turned north-northeast towards Barnegat, it got a little smoother. The wind was now behind us, and once we got up on plane, the boat was much smoother. We ran about 18-20 MPH for the most part, and our FloScan was showing a considerable burn rate of almost 44GPH. Having nothing to gauge this data against, I kept an eye on the totalizer to make sure that we would be OK on fuel capacity.

Jesse took the wheel for part of the trip, having gained a little confidence the weekend before. The seas were only slightly rolling, and as long as he kept the speed in unison with the rollers, we had a nice ride. I took the time to show him how the GPS and chart plotter work to help you plan out your trip and stay on the most efficient course. We passed a catamaran sailing north, and began to feel like we fit into this life of cruising up and down the coast.

We made it back up to Barnegat Inlet in about 2-3/4 hours, and after another 45 minutes we would be back at our marina. However, as we entered the bay from Double Creek Channel,I started hearing a 'hissing/farting" sound coming from the bilge. I brought her down to idle, and opened the hatches. It appeared that the port engine was leaking exhaust, and I initially suspected that it was the rubber riser ell swivel that gave us some problems when we installed the engines. I couldn't find any traces of water leaking, and the heat exchanger still had sufficient cooling fluid. But the fume alarm was intermittently sounding, so I turned on the bilge blowers. Must be leaking exhaust fumes.

The mechanic from the marina that had done most of the work on the boat got into a tiff with the owners and had quit. The remaining mechanic was more of an outboard guy, and I didn't want to take any chances. I contacted the surveyor from my purchase for a recommendation, and I phoned up the new mechanic. I arranged to bring the boat to his marina during the upcoming week. When I did, I put the boat in one of his empty slips, gave him a summary of the work done to date and what the current issues were. I wanted to get it checked out and resolved before we left on our "Big Trip" in 3 weeks.

What happened next was unbelievably upsetting. The more they investigated the engines the more they uncovered faulty or incomplete work. The exhaust leak was coming from a bad intake gasket, and as he took the manifold off he found loose bolts and other sloppy work. I instructed him to go over both engines. I was told from the previous mechanic that the tachs were 'bad' and not reading above 3000 RPM, but that the engines were fine. Nothing was further from the truth!! The tachs were fine, but the engines were not developing enough RPM and were slugging, causing excessive wear on the newly-rebuilt powerplants. We hauled the boat to make sure we had the right props, no bottom issues slowing the boat, etc.

What he found was that the starboard engine had the wrong carburetor! This is the same part that was such an 'issue' with the mechanic in my marina, after having broken it and loosing the replacement I provided. They wound up installing an undersized carburetor meant for a smaller Mercruiser. UGGHH!!! I contacted my marina to get the original 'broken' carburetor returned so that we can rebuild it and not surprisingly I was met with resistance and total denial. I'll deal with these guys later; I need to resolve the mechanical issues and get the boat seaworthy. I now had absolutely zero faith in the work done by them, and put total (maybe not complete) confidence in Bill & Steve, the new guys. But I did like the way they systematically went about diagnosing the various deficiencies and sea trialing boat each time they made a modification. Over the next 3 weeks, they worked diligently to get the boat to where even they would be comfortable taking her on a 600 mile cruise. I located a pair of original-spec carburetors in California and had them rebuilt to the original specifications. These arrived just two days before I was scheduled to pick up the boat.

During this layup at the mechanic's marina I took the opportunity to conduct some of the improvements that I had planned on. I replaced the Formica counter/steel sink in the galley with a custom-fabricated quartz/granite counter and new sink and faucet. I had a matching one made for the head, but this would need to wait until after the trip. I bought a new leather sofa for the salon, and installed a new remote searchlight on the fly bridge. I extended and expanded the inverter system, so that we could be more comfortable on our cruise away from shore power, and I installed a fly bridge-to-salon intercom system so that we could communicate while underway. We were getting closer to departure date (August 5th) and I was getting nervous. Plus I was spending more dollars repairing issues that should not have been a problem had they been done correctly the first time. But I came this far, I couldn't leave without having the boat running correctly. I was tempering frustration and anxiety of being done in time to leave with anger and contempt for having been had by my previous mechanic.

July 4th 2009

We all went down to the marina to spend the Fourth holiday weekend on the boat. Jesse & I went down real early on Friday so that we could play a round of golf at a nearby small public golf course, Ocean Acres. We left just ahead of all the traffic, because as we got to our exit the traffic started backing up. It was promising to be a hot day so I guess some people were trying to get an early start. Plus since the 4th was actually a Saturday, many businesses chose Friday the 3rd to close in recognition of the holiday. I chose to shutter my business Friday as well as Monday the 6th.

Jesse had been playing golf nearly every day since school let out at the private golf course next to our home, West Nine. As I had repeatedly told him, golf is a game of consistency; the more you play the better you get. These words were going to bite me in the a#$! We arrived at the course just as they were opening for the day, and lucky me, I got stuck paying for both of us! Real surprise there.

As we teed off for the first time, I could see the improvement in his game. He is becoming a little more relaxed in his swing. As the day progressed this became very obvious, but so did his frustration with 'bad' shots. If he can learn to focus and control his game and be realistic with his expectations, he will develop nicely.

Later that day we went back to the marina, and cooled off in the pool. A little dinner at the local eatery, Jenny's. Then back to the boat for an early evening spin out on the bay. We took her out to Double Creek Channel and around Sedge Island, then to Oyster Creek Channel and back home. I gave Jesse a turn at the helm and he did very well, except for the constant desire for 'more speed'. I wanted him to get the feel for the mass of the boat and how she responded to the wheel and trim before I gave him more throttle. We were still watching RPM's as her breakin period was still too soon.

Jesse, manning the wheel while I manned the throttles, began returning to Barnegat Town pier and eventually our marina. Once we got near the entrance I took over and brought her into her slip. He was feeling very proud of himself, and well he should have.

Next day we spent at the marina; Jesse relaxing at the pool and me puttering aboard with my list of 'little' things. Mom was working today an would travel down after work with Finny. There is a fireworks display at dusk right off our marina, so sitting on our boat gave us a perfect vantage point. However, it is apparently the 'local' thing for people to congregate at our marina to watch the display, plus with the town pier and the bay swim beach in the vicinity, the access road gets very congested, to the point where local police close it down. Alice had to prove to the police that we have a slip at the marina for her to get through, and she was able to arrive just at the crescendo launching of the final fireworks.

Next day, Sunday, Alice and Jesse wanted to go to Long Beach Island and do some shop-hopping. Jesse like the Ron Jon Surf Shop and Alice likes the numerous gift shops. I stayed back at the marina, and took Viking out onto the bay to watch the Speed Garvey races being held right off our marina's gas dock. Perfect way to spend the holiday; watching a bunch of speed-freaks nearly kill one another on a short oval course set up in the bay. Allot of noise, plenty of excitement and since I was new to the sport very difficult to follow who was winning. But it didn't matter since I was content just anchored out on the bay enjoying the day.

Next day Jesse had plans back home so he and Alice wanted to go home while I again stayed aboard. That list of mine keeps growing, and I would rather deal with boat-issues than deal with work issues anyway. But while I was eating breakfast and Jesse was getting ready to leave my phone kept ringing with work-related calls anyway. It was well after lunch before it stopped ringing and they left for home. We had lunch together before they hit the road and I hit the bilges for some real relaxing work.

Tuesday, June 9, 2009

Dog Days on Barnegat Bay

So now Vintage Viking is running good; she's stretched her legs and proven her new power plant is up to the task. Spent last weekend doing the 25 hours break-in maintenance. Changed the oil, checked the hoses and fittings, and replaced the fluid in the transmissions to keep the warranty in force. Took her on a few fishing trips in the Bay, that were uneventful, and Memorial Day took her out through Barnegat Inlet northward past Island Beach State Park to Seaside Heights just off the amusement pier. Saw plenty of bunker being chased by bluefish with big striped bass below them, but just couldn't get anything into the boat.

This past weekend we brought our Boston Terrier, Finster, out onto the water on Vintage Viking. He had been down Memorial Day weekend and he really enjoyed being at the marina, meeting all the new people (and their dogs too!). Jesse took Mom and Finster for a ride in his boat, and Finny had a blast. He likes to sit up on the front like a bowsprit, gazing out over the water. "Look at me....look at me...!!" he appears to be saying.



I came down to the boat Saturday just after noon. The were several things I wanted to do around the slip and on the boat. It is amazing how the 'little jobs' can add up and take an entire afternoon. But I can't think of a better way to suffer through work than t be at the marina and on the boat. A quick jaunt to the grocery store, stop at the RedBox video rental machine and back to the boat just in time for Alice, Jesse and Finny to arrive. Cook a steak or two on the grill, a little quiet time and then off to sleep.

Sunday morning I cooked breakfast for everyone. Finny kept pacing up and down the dock, but not for a 'nature call'. He wanted to get going. So as I cleaned up from breakfast, Alice & Jesse ran to get some things at the store that I had forgotten the day before. By noon we were out of the slip and heading for a local anchorage, Tices Shoal, to spend the afternoon. I thought I would be good for Jesse to take his boat to explore the numerous coves and beaches, but it was a bit choppy on the Bay, with a brisk breeze. So I set up a bridle, and took 'Little Vike' in tow across the bay towards the western shore of Island Beach State Park.

We took Double Creek Channel towards Barnegat Inlet. Barnegat Inlet separates Long Beach Island to the south and Island Beach to the north. the southern half of Island Beach, from Seaside Park to the Inlet, is a protected State Park. There is virtually zero development along this stretch of the island, except for a few small buildings for various Audubon and Meteorological instrumentation and monitoring. This is what I imagine the entire Barnegat Bay area looked like 75 years ago. Just north of the convergence of Double Creek, Oyster Creek and Barnegat Channels is the area called Tices Shoal. During the summer this is a popular party/rafting area and it gets pretty crowded at times. It was still early in the season so there were only a few single boats, and a rafting party of about five Sea Ray Sundancers. It turned out that the owners were all related and came here often.

I anchored Vintage Viking a safe distance off of the Shoal. This area is aptly named, and during periods of extreme low tide some less-prudent boaters find themselves grounded on the soft sand as the waters of Barnegat Bay flood out to sea to be recharged and then return 6-1/2 hours later. If you have nothing else to do, I guess sitting aground for 4-6 hours could be fun. I just don't like the idea of all the weight of a boat resting on the rudders, props and shafts. These Sundancers must have either prop pockets tucked up into the hull or were outdrive models, because they were there all day and i could see them heel over at slack low tide.

Jesse got Little Vike ready, and he took off to explore. He had trouble at first finding enough water to land his little boat onto the shoal, but he eventually went around the far side of the rafted Sundancers and found an area he could beach the boat. After an hour he returned to get Mom and Finny. Off they went in his boat. I was confident in his boating skills, and we were in a somewhat protected area just off Oyster Creek Channel so the big boats didn't get in his way, or vice verse. Once again, Finny felt as though he was a bowsprit, guiding his vessel to an unknown shore.




The three of them spent over an hour playing in the tidal pools of water. For a puppy, this little dog is very well behaved on a boat, even the small dinghy with two people in it. Our problem is keeping him IN the boat. He wants to jump on and off at his leasure. This is fine when they're on a shoal beach and the water is a few inches from the gunwale. But when Finey is on Vintage Viking, either at the marine or underway, the water is a little farther from the gunwale and alot deeper. He has a life preserver that we put on him when he goes for his little 'jaunts' in the dinghy, but when he's on the big boat I am hesitant to keep it on him. I am sure that over the next weeks he is going to either show me he understands "Big boat-Big water" and he doesn't jump overbard, or he is going to become very friendly with his life jacket.

Monday, May 11, 2009

2009 - First Outing

Well, last weekend was my birthday, and the boating gods did not shine favorably upon me. Friday, while making final adjustments on the boat's engines, Eddie snapped an adjusting screw on one of the carburetors, and it needs to be replaced. No problem (I thought) because over the winter I actually bought a "new" unused carburetor online just in case, since I know how expensive and difficult they are to find. BUT, the boating gods sent another bolt of bad-luck lightning down to Barnegat and for some strange reason the mechanic couldn't find the carburetor that I gave them 3 months ago. He had it in his hands three days earlier when he was cleaning the shop, but couldn't find it. UGHHHHHHHHHH!!!! New carburetor is five days away UPS. Once again boat is in the slip for the weekend.

But I wasn't going to be discouraged. I brought my 20' walk-around, PipeDreams, down for the weekend and stayed on Vintage Viking and fished off PipeDreams. It rained all weekend long, and the fishing was off. On a bright note my wife Alice traveled down Saturday night to pick up Jesse. He was supposed to have a street fair/concert that he was to play in on Sunday so Alice was coming down to bring him home. She did stay long enough for me to cook up a hot Pasta dinner for all and we enjoyed some quiet family time.

After spending a wet day on PipeDreams on Sunday, I left both boats in slips at the marina and went home discouraged a little. Another weekend of mechanical setbacks.

The following week, Eddie spent more time fiddling with the boat, eventually installing the new carburetor. Jesse and I traveled back down Friday night to spend another weekend on the boat. Hopefully all of the mechanical issues would be fixed and we could enjoy some motoring time on Vintage Viking. When we got to the marina, she was tied up at the service dock. The guys don't like to put her back in the slip if there is wind or current, and I am pleased that they take this position instead of trying to play bumper-boats getting her into the slip. She does have considerable wind surface, so it does take time and skill to get her into the slip on certain days.

However, because she was away from shore-power for 3 days, the inverter had drained the house battery bank just enough that the port engine wouldn't start. (Oh no, not more bad luck!!). but I was able to eventually get her started, and we took her out on the bay for a late Friday cruise. Once we cleared the NWZ, I throttled her up and she responded beautifully. The new carburetor and the adjustments Eddie made were apparent. She was finally out on the Barnegat Bay under power of her new power plants and was stretching her legs. Jesse got to drive her a little, and this was a special day because he had just received in the day's mail his newly-minted Boater Safety Card. He was 'official'. He was also surprised when I let him drive her. But he did very well, and I was pleased with his progress of running his own boat, "Little Vike".

We brought Vintage Viking back to her slip just as dusk was upon us. We tied her up, loaded all of our stuff for the weekend, and then went out for dinner. After dinner, we came back and settled in for a good night's sleep. I was pleased that she was running good, and in the morning I planned on taking her out for an extended run to make sure all the items on the list were complete.

I awoke about 6am, and made a quick breakfast for myself. Jesse was sound asleep and even food wouldn't shake him out of his sleep. After cleaning up, I started the engines and cast off the lines. By 7am I was clear of the NWZ and out on the bay. Jesse was still asleep, until I came upon Forked River, about 5 miles to the north. He came up on the bridge, and after a few minutes, went back down to make himself something to eat. I was heading north on the bay, following the ICW up through Barnegat Bay. Past Toms River, we ran into some light rain, but it was brief. We continued north under the Mantoloking Bridge and into Bay Head. This is a reverse-trip from the initial Shake-Down cruise, so I was familiar with the ATON's and the area. By 10am we were in the Point Pleasant Canal, heading to the Manasquan River and Inlet. We were approximately 20 miles north of the marina, and Vintage Viking was running fine. The engines were responsive, she got up on plane with ease, and there were no noticeable vibrations or shutters in her drive train. Because I was still in the 'break in' period with the engines, I never left it running at the same RPM for more than 5 minutes, and would adjust it up or down as needed to keep her moving.

I had contemplated taking her out the Manasquan Inlet and then running "outside" along the beach south to the Barnegat Inlet. This would have been a nice circuitous trip, but I didn't want to press my luck. The boating gods were finally looking favorably upon me and iI didnt want to stretch my luck. So I turned her around in the Manasquan and went back into the Canal for the return trip. I had made arrangements earlier to meet up with a friend, Karen, for lunch anyway. We would meet her in Forked River for dockside dining at the Captain's Inn.

Returning from Point Pleasant I kept her at a better clip, around 18 to 20 knots. The wind was now behind us, so the ride was a little smoother. Back under the Mantoloking and Toms River bridges, and then a short run up the Forked River and we docked at the Captain's Inn for lunch. This was going to be Jesse's first time as mate for a strange slip, so I went through with him what was needed and what I would be doing. Oftentimes there are dock hands at the restaurant, but you can't always count on them being there. Even with a stiff southeasterly wind, I was able to get Vintage Viking into the slip first time. We tied her off, and Jesse went to get a table.

Eating at the Captain's Inn is one of those things that I look forward to. Not just because the food is good, or that they have a dockside patio/bar called the Tiki Bar. But what I like most is listening to the other people that come there to eat without boats (Landlubbers!!!) talk about this boat or that boat, how nice it would be to have one. Well, I now own one of those boats, and I truly enjoy having people comment about how good my boat looks. Even though she is aged a little, she maintains her classic lines. With all of the work we put into her since we acquired her, it is nice to have people notice how she looks.

After about thirty minutes of sitting at the Tiki Bar (and finishing off a few appetizers) Karen showed up, looking for us. We waved her over, and she turned and noticed Vintage Viking. Although she has seen many pictures, this is the first time that she saw her up front and personal. She walked out onto the dock and just before boarding, she turned to me so as to ask permission from the "Captain'. I like how that sounds! Permission granted, she hopped aboard and took the tour, self-guided, and gave her nod of acceptance.

After ordering lunch, we sat at the Tiki Bar and talked about 'stuff'. She was down on Long Beach Island still looking at homes to purchase. The right one (at the right price) still hasn't come along yet, but she and her husband Bob aren't giving up yet. The real estate market in New Jersey is wacky, as it is in the rest of the US right now. But this area of the Jersey Shore still thinks it is booming years and the prices reflect that. Oh well, the market will eventually reset itself once people realize that a 'million-dollar view' home need not sell for a million dollars.

After we finished lunch, we moved the drinks and ourselves onto Vintage Viking. Still docked at the restaurant slip, we continued t enjoy the surroundings and the conversation. Even the Dock master, Bob, told us to relax and enjoy. Just let him know when we wanted to leave, and he would assist in casting us off. After about an hour, Karen needed to move on, traveling to family in the area, and we needed to get back onto the water. We said our farewells, and with Dock master Bob's help, we shove off back onto Forked River and out onto Barnegat Bay. We eventually headed back to Sun Harbor Marina and slid Vintage Viking back into her slip.

All in all, the first real excursion with her rebuilt engines was a success. We enjoyed a barbecue steak dinner later, and turned in early. Later that night the weather turned windy, the full moon raised the tides to near flood, and Viking rode high in her slip. I awoke about 2am to adjust her lines and reinforce her windward lines. Sunday morning brought even more windy conditions, and we spent the day around the marina talking with several people who had just launched their boats for the season themselves. Boaters, in general, are very social people, and when you get the right number of the right people in the right marina, it can be very enjoyable.

I think we are going to like it at this marina on this boat!!

Wednesday, April 29, 2009

2009 Spring Commissioning - Fresh Engines

During the week the boys at the marina were able to replace the raw water pump on the port engine. Now, at last, I would be able to take Vintage Viking out on the water for some sea-trials of her newly-freshened engines and systems.

I traveled down to the marina early on Saturday. I had arranged for the local cable TV guy to come and get me some 'rainy-day' television capabilities. I was getting tired of the DVD collection, but didn't want the full package so I opted for basic TV channels. Never know when these guys show up, so I was at the marina at 8am. Jumped on the boat ready to fire up the engines. But no dice. The starboard battery bank was stone cold. I had recently replaced all the batteries, since they were accidentally boiled over during the winter. But I hadn't heard the on-board charger running since the boat was hauled out, and as I investigated the problem my worse fears came to be; the charger was dead. I traced all the fuses and breakers but no DC power. After what seemed like hours, I gave in and I opened it up. I found that there were overload fuses on each of the three banks to protect it, and they did just that. New fuses, an hour or so to charge up the batteries and I was ready to go out on the water.

But, not yet. The cable tv guy shows up, and gets started. Nice guy, puts the wires where I ask, but no tv signal. Apparently, the entire side of the marina is dead, not having had any customers for the last 3 years. OK, strike two for the weekend. But the engines were running!!!! I cleaned up a bit and cleared away all the tools and such from my little maintenance projects so that I can go out on the bay.

Untie the boat, pull out of the marina and into the no-wake zone. It was such a beautiful day for late April. Forecast was for clear sunny skies and temps in the high 80's. This was gonna be great!!! I approach the end of the NWZ, and begin to accelerate, being cautious of break in instructions. As soon as I attempted to hit the gas, both engines cut out. Started right up again, but would cut out when I accelerated slowly. Carburetors must need more adjusting. If I accelerated quicker, the boat would run. OK then, quick it is. As I approached 2500 RPM, the port engine started to require excessive throttle to keep up, and would only get to 3200. Strike three!!!

So here I was, four months since haul out and major engine work, and the damn thing wouldn't run! The boating gods were not looking upon me favorably today. But it was still floating, the starboard was running OK and the weather was great. So I decided to push on, and to put the boat through several tests and develop a list of issues. Being in the construction business all of my life I am very familiar with 'punch lists'. Since I considered the re-powering of Vintage Viking to be a major project, I treated the repower of Vintage Viking like one of my construction projects that we would run commissioning tests on the major equipment before turning it over to the owner. For the rest of the weekend, I would be the Owner and want to see the Project perform to my satisfaction before I accept it as complete.

Overall, the work done was exceptional. The problem was that since I was trying to get the work completed at the same time as my fellow boaters were trying to get their boats wet, the staff at the marina was a little overworked. Eddie, the mechanic who took over once the engines were set into the boat, had worked long and hard to get it to this point. But he was also pulled in other directions for other clients. He apparently never had time to take Vintage Viking out on the water for test runs.

I made the marina aware of the issues by sending them a report, similar to what I get from my clients. For the next three days, Eddie was back on board tracing down the little bugs that vexed me last weekend. On Wednesday I traveled back down at the end of the day. The weather was much cooler than the weekend, but still great to be on the water. As I puled into the marina I could see Vintage Viking moored up at the service dock. Eddie & Mike had just gotten back from a run on the bay with her, and were making some additional adjustments. Mike asked "wanna go out for a test ride?". Yeah, like I needed convincing. Hopped aboard, threw the lines and we were off. Boat sounded and behaved allot better, and soon were were taking her through some paces. Adjustments to the carburetors paid off, as port engine was doing much better, topping out at 4200RPM and running allot smoother. Still had some problems with instrumentation readings a little wacky, but Eddie was still on it. We were out for about an hour, and i had set up the portable hand-held GPS. Once I got the boat up plane, I was pleasantly surprised to see she was doing a 29MPH clip into the slight wind. What an improvement over the 18 MPH before the engine work.

Looking forward to the weekend. Since my birthday is Sunday, this weekend qualifies as MY time to do whatever I want. I'll be spending the entire weekend on board, regardless of what Mother Nature, or the Boat Gods, have in store.

Tuesday, April 21, 2009

Launch 2009

After the extensive work done during the past winter layup on the hard, I had been anxious for weeks to get Vintage Viking re-launched and back in the water. There was still work to be done, as there always is with a classic (note: not OLD) boat. But I believed that I had done as many of the projects that required the boat to be on the hard that I could financially afford to do this year. Both engines were in and running, but we did suspect that the port engine needed to have the raw-water cooling pump rebuilt (even though this was done as part of the winter refit). But this could be done once the boat was in the water.



Weather fronts prevented the detail crew from completing the entire boat and superstructure, but they were able to complete the waterline-to-rub rail portion of the hull. The rest would wait until the weather cleared and I could get the detail crew back. But I could wait no more. The marina had made arrangements with the hauler to transport the boat from her winter mason-block pedestals to the launch ramp down the street at the Municipal Dock.



The gentleman who runs the hauling concern is an octogenarian German who custom designed and built his tow vehicle and trailer to meet his needs. If he thought of a better way to do something, he would probably re-engineer the entire rig to meet the need. Even though the surrounding area had plenty of lagoon-front homes with boats in the backyard, this man could, and did, make a living of hauling these boats out of the water in the backyard and re-depositing them onto blocks in the front yard for winter layup. He didn't need to travel very far; just in the immediate area I would guess there are 300 potential clients.



Late in the day on a beautiful Spring Friday, he came to the marina to re-load Vintage Viking onto his haul trailer and get her wet again. Just as Jesse and I had turned the corner at the bend between the Municipal Dock and the marina, we caught sight of the boat moving across the Earth on this freight-train of a truck turning onto the road. Because of her height above waterline, and the added presence of the gin pole, someone had to ride on Vintage Viking while she made her journey so that he could lift low-laying wires that stretched from utility power poles on the road. This process would repeat itself about four times before the boat was down the street in the Municipal Dock parking lot ready to be backed down the ramp. It was not surprising to see that as Vintage Viking made its way down the street she attracted about 6 or 7 groups of onlookers, gawking at first her size and then the ease at which she moved over land. Even as we prepared to release her bonds and straps keeping her on the trailer, she still seemed graceful and at ease.




As she was backed down the ramp and began to get wet, first her props, then her rudders, and finally the keel and lowermost part of her hull, I could almost see an AAAAHHHH come over her. Like when you slip into that cool clear water of a swimming pool on that hot summer day. The mechanics from the marina were on board now, checking through-hulls and preparing the engines to run. After several minutes of 'discussions' between the sage octogenarian hauler and the young enthusiastic mechanics as to what was the best way to get the Viking off the pads of the trailer and floating freely without getting the haul-truck into the water. After a combination of slight tugging, easing the trailer a little further and the prevailing wind pushing the Viking into the water. She was now finally afloat, at home again in her wet environ where she belonged.



I climbed up to the flybridge and took the controls for the first time this year. I could hear and feel the smoothness of the rebuilt transmissions and the power of the engines. I eased the boat down the channel, away from the Municipal Dock for the short 500 yard trip to the entrance to the marina and eventually her slip. I gingerly ran the engines, not wanting to overheat the port engine, yet still have power to overcome the windage once I was ready to back her into her slip. She responded to the slightest touch of the controls. I will be very happy to open her up and unbridle her newly-freshened power plants. But a little at a time; remember break-in instructions from Crusader........

Wednesday, April 15, 2009

Little Viking

My son Jesse experienced the thrill and exhilaration of riding on a waverunner five years ago on a family vacation to Lake George. He was too young to ride by himself, and the waverunner operator had his setup in a large cove on the lake and kept the waverunners within certain boundaries. Even though he sat behind me, I could feel his enjoyment as he held onto me while we got 'major air' each time we jumped a wave. I guess it's natural for a young boy to want some independence and feel the power of the machine he is riding through his grip. The smile on his face will last forever in my memory.



Partly because of the inherent propensity for these powerful machines to go really fast and equally because people who operate them can be very careless, laws are now in place requiring PWC operators to be 16 years old and pass a safety course. Similar laws are in place for someone 13 years old to operate a boat with less than 10 hp. I'm positive that the insurance industry had a hand in these laws being passed. But I am pleased that these laws exist, for the benefit of not just my son.



Now 14 years old, Jesse still has a love affair with waverunners. But he has two more years to go until he is old enough to operate one by himself. This past winter he took the boating safety class, and got a 96 on the test. As a reward I bought him his own boat and outboard so that he can have his independence and can gain valuable boating experience. We all can remember our first bicycle, usually having training wheels. the exuberance that we felt once our parent or older sibling let go of the bike and off we went 'on our own'. Our first boat is very similar in this manner, as it gave us independence and an expansive world for us to explore. Jesse's first weekend with his boat was very much like my very own experience many years earlier.



We both came down to the marina Friday afternoon; me to witness the hauling and launching of Vintage Viking after its extensive refit over the winter, and Jesse with the hope of enjoying is first 'launching'. Once we got Vintage Viking into her slip (see additional post on the launch), Jesse was antsy to get his own boat launched. The launch of 'Little Vike' was much easier than its bigger brethren. Jesse and I slid his little boat over he edge of the bulkhead and into the lagoon with comprises the majority of the marina's water.







After several minutes of testing the engine to make sure that it ran, I got out and Jesse jumped into the boat. As any parent would do, I gave him boundaries and limits of where he can go. In a blink of an eye he was tooling up and down the lagoon, it looked like he had been boating for years. But this belief was soon chased away. I noticed Jesse rowing the boat back to the dock. He shouted that the "engine just quit!" As I smiled, I asked him the immortal question; "Do you have gas in the tank?" A puzzled look and a glance of pity.


He learned that valued lesson of all non-sailboters. Every boat, even small ones, run on fuel. And it doesn't get in the tank by itself. Oh, what a proud moment.

Winter 2009 Refit & Refurb


Once the Winter of 2009 arrived, my focus shifted to the tasks outlined in the Surveyor's report rendered at the time of purchase. There were many tasks to get underway. Some would be farmed out to service providers and some would be done by us. Oh, where to start!!!

I had gotten quotes for the most extensive of repairs; the port engine refurbishment. There were many options for this work. I could just do 'top-end' repairs and pull the heads and re-machine. But this wouldn't address the main block and if there were weak pistons or bearings the now-stronger heads may overpower the remaining old parts. I could pull the engine and replace it with a factory rebuilt engine, but you don't know what shape or from what type of vehicle the rebuilt engine came from. The 454cu inch Crusader was built on a GM 454 platform, and this engine could be found in Chevy's, Buick's, Cadillacs, Chevy or GMC trucks. It could come from an old boat bilge where the block had raw-water cooling with pitting and blocked passages. I could go 'on-line' to one of the web-based purveyors of packaged bobtail engines, where all the components from carb to flywheel to transmission are 'refurbished' and ready to install. But most of these purveyors are in the Florida market, and too far to provide warranty coverage. Plus 'refurbished' doesn't mean rebuilt and reconditioned. It can just be cleaned, painted and reassembled.

After much deliberation and comparisons, I decided to have the engine removed, disassembled and the various parts sent out to be rebuilt, reconditioned, painted and reassembled. I also decided to have the service guys at the marina do the removal and reassembly. I figured it was the off-season, that they would appreciate the work and therefore give me a good price. Since I was developing what looked like a long-term relationship with them I had high hopes that they would value this and do the right thing. And lastly, I figured that they were local and I could ride rough-shot over them to ensure that the work progresses. Since I was going to perform numerous other repairs and would be at the marina anyway, this was logical. I got an estimate for labor-only, and I would provide all of the required rebuilt parts and services. I looked at the Refurbishment of Vintage Viking as I would any other renovation project I run for my clients with their homes.

But what really added to the scope of the project is that since I was going to save so much money by managing the process and dealing with the rebuilders directly, I felt it would be advantageous and cost-effective to have BOTH engines done. The starboard engine, while in better shape than the port, had equal running hours and it was only a matter of time before I would have to do this work anyway. This way everything in the drive train would be refurbished, and once done there would be no further need to rip the boats bilge apart for major work. This decision would prove to be both intelligent and well-thought out for the long-term, and quite stupid given the ever-diminishing state of the economy in general and my impending work-related injury that would sideline me for a while.

In early January, we had both engines and transmissions out of the boat, disassembled and loaded on the trailer for distribution to various service providers. The engine blocks would be sent to IDM Machining to be totally rebuilt, head to oil pump. The transmissions would be sent to a local Borg-Warner shop to be bench-tested and rebuilt if needed (they needed it!). Starters and alternators would go to a local auto parts rebuilder. The carbs would be rebuilt, as would the raw and fresh water pumps. The heat exchangers would prove to be too expensive to replace, so I sent them to a radiator shop that I use for my work trucks. The exhaust manifolds would be replaced with new, as this was due to be done on both engines anyway.

By mid-January, all of the shops were busily tearing the parts down and preparing to rebuild. I would take advantage of the now empty bilge area to clean it up and do various little tasks while there was room, such as replacing the holding tank macerator and running some wires for future planned upgrades. One thing that I hadn't planned on doing right away was replacing the flybridge bimini and enclosure. But the advanced deteriorated condition of the zippers and windows proved too much for the cold winter weather when the boat was hauled out. The combination of dry cracked material and the cold weather led to big splits and cracks in the enclosure. It wasn't cost-effective to repair, but I wasn't going to spend the $6,000 that I was quoted to replace it. As luck would have it I found a canvas mechanic who had lost his lease at a local marina and was willing to work from home and do the replacement of the enclosure for half the price. While I would normally be very suspicious of this arrangement, once I met Ed I judged that he was a good mechanic that would do a fine job. This would prove to hold true.


Everything was moving along nicely. I was gearing up to begin my work of replacing the hot water heater, the stereo, the battery banks and install an inverter. The gas-powered generator was old and inoperative, and I feel that the cost to refurbish would be wasted money since I didn't really need it until we start extended cruising and the technology of these powerplants has improved so much I decided to remove it from the boat while all the engine work was being done and then look for one in the used market. But what I didn't plan for was getting injured at work in late January that sent me to the hospital for knee surgery and weeks of rehabilitation. Great!! I have the boat ripped apart, major components in various shops and state of rebuild, and I am sidelined. Not only can't I contribute to the Vintage Viking Refurbishment Project, my 'real' jobs would begin to suffer since I couldn't do these either with a bum knee. There goes the income stream that would provide the needed cash for Vintage Viking (as well as to live on). Self-employed building contractors don't generally have insurance for lost-work, and I had three major client-projects underway at the time. Thank God for certain good friends who stepped up and helped keep these jobs moving forward while I recuperated at home.

I was able to manage to keep the engine work moving forward while I was home. By mid-February the majority of the components began returning to the marina for reassembly, and with all this 'spare' time on my hands I was able to invest time in shopping for better prices on some of the items like the manifolds. By late-February I was back on my feet (part-time) and I was able to begin running around to get items like the rebuilt transmissions and other parts picked up and brought to the marina. Mike the Mechanic was busy now reassembling the engines for re-assembly. Except for one glitch of installing the wrong transmission on the wrong engine before installing it in the bilge, Mike and the boys did a commendable job. By mid-March both engines were back on the boat, and now Eddie took over finishing the install and wiring and hose connections.












As will always happen in such projects, there came a time when small items started to pop up. First it was a motor mount that was cracked, so I replaced both sets of rear mounts. The wiring harness on one engine was worn and cracked, so I had it replaced. The port cutlass bearing was blown out, and since I wasn't sure of whether the propellers were tuned and matched recently, I had them removed and reconditioned by a vendor that I have used previously.








By now I was able to contribute to the work effort. I was able to replace the illegal hot water heater with a new ignition-protected marine heater. I took the time to pipe in a bypass valve configuration to aid in winterization.



I removed the old Halon fire-suppression tank and replaced it with a new dry-chemical system. Once Mike and Eddie finish the alarm-detector replacement, we can tie the new fire system into the alarm and fuel valve shutoff



Marine battery banks have a tendency of running until they just quit. Over the winter I would normally remove the batteries and keep them on a trickle charge. Because I was having all the work done, I left them onboard, only to find out that they would drain if not kept on the onboard charger. I decided to replace them, since I was also going to install an inverter to provide limited 120volt power while I'm away from the dock. I was surprised to learn that the boat had four golf-cart 6 volt batteries, connected two in series per bank. I began to doubt that these were OEM configured. But a phone call to Viking engineers settled this matter. Golf carts run all day on a single charge; eighteen holes and sometimes more. They should last all day on a boat, depending on the draw. Most of the marine-supplier outlets wanted almost $1,000 for replacement batteries. But a phone call to my Napa Auto Parts connection got me four quality Interstate brand batteries for half price. A quick run down to the marina after work and I was able to swap them out.
Initial commissioning of the new engines revealed leaking oil hoses from cooler to the remote filter assembly. Once again I made the call to replace these on both engines. Additional parts for antifreeze, hoses, bolts, etc. started to add up until the recent billing looked like a mortgage payment, not a repair bill. But I was too far down the road to refitting to give in and start shortchanging the process. Now I am beginning to see how my clients must feel when I am halfway though their renovation project when 'unforeseen things' pop up and need to be addressed. I tell my clients upfront to expect 10% over-budget allowances; I should take my own advice, but since it's MARINE I should allow for 30% over-budget(lol)!!
Hopefully, we are nearing the end of the 'while-you-are-at-it you-might-as-well-do-this-or-that' and can get to a point where the boat can be put in the water and tested out. I am being told that it should be in the water this weekend. Boy, I sure hope so because part of the reason that I have the boat is to help me get rid of my stress and tension from work, not add to it! I look forward to Friday afternon and getting a call from Mike that the boat is afloat.








Monday, February 2, 2009

Fishing Tournament Blowout - November 15-16, 2008

After last weekends' striper bounty, I was all fired up for the Fall Striper Tournament. But the weather forcast was foreboding with a strong wind building and unpleasant seas. There was a scheduled Captain's Meeting for Friday, but before I could even make it down to the boat the sponsors had mabe what turned ut to be a prudent decision and canceled the Tournament.

But I wasn't going to waste the trip down. I decided to stay on the boat and see what the morning brings. It was a windy, wet, and cold night at the beach. There were very few other boaters in the marina. Still, nothing beats a night on the boat. But it was a bit cold and thankfully the heat works.

In the morning, there was pretty much more of the same weather. Prepared a hot breakfast and took a hot shower. The weather forecast had small-craft advisories, so I decided to get some estimates for work done. While I'm the first to try and 'justify' then ends by the means, I could build a case for getting more work done in the same alloted time. Having this boat should make getting my 'other' work done easier! Yeah, Alice didn't buy the argument either. But truth be told I was able to get alot of work done on the laptop, even though I didnt have a printer and internet. THe printer is an easy solution; they almost give them away at Best Buys. I picked up an HP Multifunction for under $100 that will even fit in the dinette locker. The internet connection will require a long-term resolution. There are services for cruisers that work more reliably in most areas, but a modem cell-card is probably the easiest resolution. I may look into cable triple-play in the Spring for the slip.

After spending the day, a rainy windy and miserable day, on the boat I did get alot of 'real' work done. If this is a prelude to how I will spend weekends in the Spring next year I'm all for it. I spent a few hours straightening up the boat, and with the continued weather I checked the lines and fenders one more time. Said goodby to the boat, and went north to the house

Monday, January 12, 2009

First Fishing Trip - November 9, 2008

Ok so I awake early Sunday morning. The skies are grey and foreboding, the winds deliberate and steady. I treated myself to a hot breakfast (no sausage today!!!yeah!!) but hot oatmeal, toast and coffee was enough to get me started. I did tend to linger around on the boat for what seemed to be hours, waiting for the weather to either blowout or get worse. By 8am I had decided to go outside the Inlet to where the other locals were seen yesterday. I still had leftover bait from yesterday when I tried to go fishing with Jesse the green-gilled teenager. I was going to try again today, even if I was alone on the boat.


I threw off the lines and cables, and I brought Vintage Viking out of her slip. As I headed across the Bay to the Inlet I noticed that it was taking a little longer, since the winds were coming from the northeast. Once I cleared the jetties at the end of the Inlet, I no longer had any landfall between me and the wind. The waves kept rolling in and got larger and more frequent. I headed about 2 miles out, to where I could see the rest of the 'fleet'.


At first I tried drifting clams across a sandbar, right at the edge of the fleet. I must have found a school of dogfish, because every time that I dropped a line I had a sluggish hit from one of these sand shark species. In less than an hour I ran through all of the bait that I had on board, and the morning was still young. I hadn't even seen another boat pull in a striper, and the chatter on the radio talked about bluefish, but not stripers.


I hadn't been able to rig Vintage Viking out for trolling yet, but I did have a pair or wire-line trolling rods on the boat. These are stout yet flexible rods with special guides and reel to handle the stainless steel wire that is used. The principle behind the outfit is that the strong yet small diameter wire line 'cuts' through the water, getting it down in depth to where the fish are. It's small diameter contrasts to its high tensile strength, with virtually zero stretch. At the business end you have a streamlined barrel swivel followed by a short (3-8 feet) piece of 45# test monofiliment with the lure on the end. This piece of monofiliment creates a shock absorber for the initial strike, as well as it breaks the visibility of the steel line. The heartiness of the rig allows you to set it in a custom-designed rod holder that keeps it near parallel to the water. You put you lure out in the water, allow an ample amount of line out and then set the rod in the holder. I use a nylon dog lease attached to the rod and boat to prevent the lose of the rig, should a strike take place with a near-lateral pull that could yank the rod out of the holder.


I set up both rods, one on each side, with different offerings. One rig had a Stretch25, which is an 8" lure with a diving lip. As the lure is drawn through the water, the lip helps drive it down; the correct combination of line out, speed and lure lip angle will put the lure at a certain depth. If you locate fish on the sonar at a certain depth, you present the lure at a slightly higher depth, since fish look up, not down. On the other rod, I had an outfit called an umbrella rig. It is designed to replicate a school of swimming bait fish; shad in the case of the rig I had on. I set up a troll with the prevailing winds approaching from astern. In this manner, should I hook up with a fish, the wind would keep the boat going strait in a line, windward. I was on the boat alone, and the only place to drive the boat from was the flybridge. Should I get a hit while trolling, I would need to leave the bridge, climb down the ladder to the cockpit and remove the rod to fight the fish. That will take a lot of time once a confirmed hit is on. But I didn't think I would have that problem, since so far I wasn't very lucky catching fish on Vintage Viking.


I kept to the fringes of the rest of the boats on the ocean this day. I didn't want to crowd anyone, and I wanted to boat to have plenty of room for be wind-driven should I need to work a rod. After about fifteen minutes of trolling the area, I came across a school of bait fish. But a quick glance at the rods showed no alterations in the rod behavior. But another ten minutes revealed a dancing rod tip, so I placed the engines in neutral, allowing the wind to drive the boat, and scurried down the ladder. As I pulled the port rod from its holder, I felt a solid strike and hookup on the rod. But as I settled into the ensuing fight, I noticed the starboard rod pulsating now. A Jersey Double-Header!! But I was alone on the boat. So I tweaked up the drag on the starboard rod, in the hopes that the rod and the wind-driven boat would keep enough pressure on the fish so that I could fight the one on the port rod without losing the one on the starboard rod.


This fish was big....he brought me around the cockpit twice, and then headed toward the front of the boat. I followed him around the superstructure, onto the bow and back again. After a thirty minute fight, I had him near the rear of the boat, by the swim platform. But I was alone on the boat!! Who was going to net this fish? Having fished alone on Pipedreams for years, it becomes a well choreographed dance to keep pressure on the rod and still get the net under the fish. I use one of those big salmon nets with the telescoping handle; its easier to extend it out, get under the fish, and then drop the rod and use two hands to bring in the fish. It was a nice 35" striper. In the cockpit now, I dropped the net handle and paid attention to the starboard rod, still bouncing. A short 5 minute fight, and another 35" striper was in the boat. This fight didn't take as long, since he was tired out from the wind-ride. I put both fish in the box, and took 5 minutes for myself. What a rush!


The current limit in NJ is two stripers per person, greater than 28" in length. I had two such fish, so I was keepered-out. But I reset the rigs, and trolled again. Two more similar hits got me one more striper, a 31", and a 28" bluefish. released the striper; kept the blue fish. Reset the rods and trolled again. Another pair of hits; another striper/bluefish combination. Another released striper/kept bluefish. I kept trolling in toward the Inlet, but after another 30 minutes of no hits, I pulled in the rigs and headed home.


Back at the marina, I was pretty happy. A fantastic fishing trip, even though the weather wasn't the best. The wind kept up all day, but I didn't care. I had a bounty in the box, and a smile on my face. a few pictures to capture the moment, cleaned the fish, gear and the boat. I packed everything up and headed home. I am going to enjoy doing this again on the 'man-cave', but right now I missed my wife and son. An hours driveand I was back at home, retelling the story, with pictures to prove it.

Sunday, January 11, 2009

Guys Night on the 'ManCave'-November 7-8, 2008

My love with the Jersey Shore began as a young boy, coming each year to spend two weeks with my family at some rented bungalow. When I was in my early teens, my parents bought such a bungalow, on the shores of the Metedeconk River near the Barnegat Bay. We would spend weekends in the spring and then again in the fall at the shore house, in addition to all summer long. My dad would stay back home and work, then travel down the Garden State Parkway Friday afternoon to spend weekends with us, then drive back north Monday morning.



One of the benefits of growing up in Central New Jersey was being exposed to the weather changes from the Four Seasons; cold and snowy Winter, balmy and rainy Spring, hot and sometimes humid Summer and the cool and at times brisk Fall. But being in a more 'temperate' zone, most times one season's weather would run into the next. When this happens at the end of Summer/beginning of Fall, it is said to be an Indian Summer. Often times a warm day with slight breezes would only be accentuated by the colors of leaves on the deciduous trees changing color. Nowhere is this transition more beautiful than along the Jersey Shore. New Jersey has 1,792 miles of shoreline along 127 miles of Atlantic-facing coast and 83 miles of bay front on Raritan and Delaware Bays. Plenty of beaches to walk and water to boat.


Vacationing and seasonal visitors to the Shore generally leave by Labor Day weekend, traveling back 'home' to start a school year anew. The crowds and traffic of summer at the Jersey Shore is replaced with an almost ghost-town appearance; the locals going about their lives and several die hard 'visitors' returning on weekends to enjoy one last trip to the Shore. One of the reasons I chose the style of boat that Vintage Viking is, a Convertible, was to allow us to use it as a weekend retreat. Combining my love of the water and of the beauty of surrounding landscapes make this time of year, the 'Indian Summer' of Fall, my most favored. Fishing is active for many of the coastal species, with my favorite, striped bass, being the fish-of-choice for me.

I had planned on spending the next several weekends taking Vintage Viking out fishing for striped bass. Since we had both Barnegat Bay as well as Barnegat Inlet at our immediate vicinity, we could be in prime bass waters in short order. But I was accustomed to fishing from Pipedreams, my 21-foot walk around, set up for wire-line and downrigger fishing. I hadn't spent much time rigging Vintage Viking for fishing. But I did register her for the Annual Striper Tournament run from Sun Harbor Bay Club, scheduled for the following weekend (November 16th). This would give me a weekend to take Vintage Viking out for a trial fishing assault.

Jesse and I traveled down to the boat about mid-day Friday. School was closed for Teachers Convention, and I had two appointments scheduled this day, and one was actually on the way to the boat! After the meeting, we stopped at the local boat-a-holics watering hole, BoatersWorld. Aisle after aisle of all the must-haves from their latest catalog. Lotsa stuff, some expensive. But I had to buy a tee shirt. Jesse got a Helly-Hanson coat. Amazing, a teenager that would actually like clothes for boaters.

We got to the marina just as the service technician from the local Crusader Engine shop arrived. I had arranged for them to come and look at the engines and give an estimate to replace them. I had developed a refurb plan based upon the surveyor's pre-purchase report, and the engines were the biggest part of the plan. While I dealt with the engines and the technician, Jesse looked thru the takeout menu from the local eatery for something for dinner. I travel down to the boat with a gourmet chef (Jesse was once on the Ellen Degeneres Show as a 10-year old chef. More on that later) and eat take-out! Quick selection, a phone call and dinner was ordered.

Having finished with the engine report, I drove Jesse to the eatery, picked up dinner and supplies at the supermarket next door, and it was back to the boat for some 'guy-time'. When he was young, Jesse would sleep overnight on Pipedreams, which made for a snug night. It has a cuddy cabin with a cozy v-berth with a porti-potty below it. Not much more than that. But we did have many a good night together. Breakfast was cooked in the cockpit on the Magna barbecue. The accommodations on Vintage Viking are definitely more spacious, and Jesse set about converting the dinette into a double bed after dinner was finished. We took a few minutes and went to the locker house to use the showers, since I hadn't been able to work on the boat's water system yet. But the hot water of the showers felt good. Even though the days are warm during Indian Summer, the nights are fall-like and cold. We returned back to the boat and got ready to chill out. We played cards for a while. After Jesse kept losing at cards, he decided to watch a movie. He had selected a few movies from the DVD collection I had onboard, and we watched movies until he fell asleep. When I called Alice later that night to say goodnite, I had told her how Jesse had fallen right asleep on the boat. Alice coined a new term; she called Vintage Viking the "man-cave". I think that will stick.

Next morning it was a little overcast and windy. The forecast had rain coming sometime later in the morning or early afternoon. Before long Jesse woke up and started cooking breakfast. About time; my gourmet chef returned! The chef is gourmet, but the meal was basic. Sausage, oatmeal, eggs, coffee and orange juice. But it was enjoyable to see him at work in the boat's galley. He gets so involved in his cooking, and then of course there is the mess he leaves behind. But to see his exuberance at what he does, even if its only breakfast. But the galley has an electric range, and Jesse isn't used to cooking on one. The sausage wasn't really cooked throughout and it kept returning to remind us later on.

As Jesse finished up from breakfast, I began to get Vintage Viking ready for a day out on the water. As we pulled out of the slip and past the end of the marina, we stopped at the gas dock to pick up some bait. The marina owner and his son Joey were more than happy to tell us what the local bait dujuer was and where the big ones would be. That's why I like this time of year. No crowds mean people have more time to devote to being....nice. I turned the boat up-channel as I pulled away from the dock and headed out into Barnegat Bay. Hot coffee by the ready, and crew a little queasy from the sausage.

Once we got out into the Bay, the wind started to kick up. That's the funny thing about Indian Summers. They can be fleeting. The more we got away from the mainland and closer to the Inlet, the more the wind whipped and the mist came. Once we got out beyond the Inlet jetties, the rollers started bobbing the boat. Jesse began to grow a little green around the gills (was this from the sausage?) and wasn't enjoying his father-son time anymore. He did give it the best that he could muster, but he kept getting greener and greener. By mid-day, the rain started falling, the fish weren't interested and Jesse was ready to heave. Captain's decision.....return to port.

The ride back in through the Inlet was short, and once we cleared the Sedge Islands at Oyster Creek Channel, the rain started falling heavier. i had to slow down so as to not pulverize my face from the rain. Lowering the front windows of the bridge enclosure rendered me near-blind, mostly due to the yellowing of the issenglass (new enclosure will have to get put on the bottom of the list) and the bimini top was leaking profusely from small dry rot cracks (new enclosure will need to move up to the top of the list).

As we neared midway home, I called Jesse up onto the flybridge. My thoughts were that if I could get his mind off his stomach he would feel better. I had him get behind the wheel and together we navigated the channel and headed back to home port. The rain continued, the wind increased, and the visibility diminished. But Jesse did a great job and after a while his color returned to something near-human.

We pulled into the slip, tied off Vintage Viking, dried off and heated up some soup. There's nothing like a hot bowl of chicken noodle soup, even if you're not sick, to make you feel good. The rain continued to lightly fall, and the marina was a calming quiet, and before long we were both taking naps. In a little while, I got the phone call from Alice. Jesse was due to work later that night and I had planned on driving him home. Via phone-texting with Alice earlier in the day, she offered to drive down to pick him up, so that I could stay on the 'man-cave' for another day. Great idea!! Unfortunately, I had given her wrong directions, and after a 45 minute drive in the wrong direction, she found herself in the middle of the Pine Barrens. Boy was she pissed, and rightly so. I told Jesse to get into the truck and I would drive him out to meet Mom at the Parkway exit. When she finally retraced her tracks and got back to the exit, she was hotter than wasabe. I must have apologized ten times, but it didn't matter. I screwed up the directions and she wouldn't let me forget it. But Jesse was off to his job, and I was on my way to the nearest hardware store to get parts and supplies to begin work on my list.

After stopping at Home Depot, Walmart and Lowes, I returned to the marina to begin my work. I had plenty to do and supplies to do it. I began with the water system. I fixed the hot water heater, fixed the leaks in the cold water piping, found that the water tanks hold water but the 12v water pump doesn't. After three hours, I was able to turn on faucets and have hot water. I was able to bypass the non-operating AC condenser pump with a hose run to the service hose bibb in the lazarette, and now the reverse-cycle heat/AC was working. And how nice it was to take a hot shower on the boat.

Tuesday, January 6, 2009

First Family Outing- October 27, 2008

After spending the weekend in Baltimore for my new grandson Tyler's christening, we stopped at the marina on the way home. OK, it 'really' wasn't on the way home exactly, but that didn't matter since I was driving. Coming home on Monday I made a slight detour eastward from the Turnpike and came across the Pine Barrens of NJ and arrived at the marina around lunch. My son Jesse had seen the boat & marina already, but Alice hadn't yet.

It was a beautifully sunny fall day, with only a slight breeze. Pulled into the marina and you couldn't help but notice that Vintage Viking is the LARGEST boat there. Plus with it being late October many of the smaller boats were already out and on land. Alice got the nickel tour, and her first response was how much larger the boat was from our other boat. Pictures she had seen are deceiving, because they generally have little other items for reference in them. But my 'crew' was hungry and wanted lunch.

While I stayed and puttered on the boat, Alice & Jesse ran to the nearest McDonalds and brought back lunch to the boat. We ate our lunch in the dinette, and Alice could see the look of sheer enjoyment on my face. After finishing my cheeseburger, I left the table and began to prepare Vintage Viking to depart the dock for a short run around the bay. Within minutes, we were out of the marina, passing the Barnegat Town pier/park and entering Barnegat Bay. Alice remained in the salon reading a book, while Jesse & I were on the Flybridge.

It didn't take long before Jesse went below and convinced Mom to come up onto the bridge to join us. Alice wasn't aware of how roomy the bridge is, with a large seat for five in front of the helm. She relaxed into the seat and continued to read her book and just enjoy the fresh air and view. After several minutes of relaxing and getting over any anxiety she had about Vintage VIking, Alice wanted to go below to get the camera. But she didn't want to go down the ladder with the boat moving, so I brought the boat down to an idle, and helped her down. I took the opportunity to visit the head while I was below. But when I went to flush the electric head, it wouldn't work. The head pump didn't come on. I checked the panel and the breaker was tripped, but each time I reset it and tried the head pump, it would trip again. But the holding tank level indicator said 1/4 tank. Looks like I have another thing to add to my check-out list. But later on this will return to be a problem.

Once Alice got the camera she started snapping away. Next thing I know she is walking around the superstructure and is up on the bow, clicking away. Note to self; put an extra pair of soft-soled boating shoes onboard. She still had street shoes on. But I didn't want to stop her since the objective was to get her on the boat and enjoying it. Better shoes can come later.

Soon we get in the middle of the bay, and I enter Oyster Creek Channel heading for Barnegat Inlet. We come around the Sedge Islands, and turn in front of the Coast Guard Station heading east. We come onto Barnegat Lighthouse, affectionately called Old Barney. Alice has seen this lighthouse countless times from land, and has even climbed its 217 steps to the top. But to see it from the vantage point of the water gives it a different perspective. You can imagine how seafarers of old would see it and rely on its Fresnel-powered beacon to guide them. Well, anyway, Alice must have clicked off two dozen shots of the lighthouse from every water-borne angle before she realized that Vintage Viking was actually headed out into the ocean. When she turned to me and asked “we aren’t going out into the ocean, are we?” I could see the anxiety in her face and replied “no Honey, I just wanted to help you get even more angles of shots for the camera. I’m turning back now!” Damn, and I was hoping to get outside the breakers. But the objective was to get Alice accustomed to Vintage Viking and enjoy her time on the water, not resent it. Do I get the Good-Husband Award for that?



After several more minutes we were back into Barnegat Bay. I came back across Oyster Creek Channel and wandered into several lagoons in Waretown and Forked River, showing Jesse and Alice some of the other marina’s that Jesse and I had visited weeks earlier when we were looking for a new home for Vintage Viking. Like anything else, it all takes on a different look from the water. Even something as mundane as the bulkhead of a marina and its entering channel look different from the water.

Heading back to Sun Harbor Marina, I decided to stop at the fuel dock again. Not for gas (thankfully), but for access to the holding tank pump-out. I emptied the tank but it didn’t appear to require a lot before the vacuum wasn’t pulling anything out. I tried to reset the breaker on the pump again, but it still tripped.. By now, Alice & Jesse were beginning to think this whole head thing was funny. The jokes and wisecracks started, and pretty soon Jesse was paraphrasing the movie “RV” with Robin Williams and called Vintage Viking ‘floating turd’ in lieu of the ‘rolling turd’ from the scene in the movie. Well, I couldn’t have Vintage Viking made fun of! So I brought the pump-out hose thru the porthole window and directly into the head, and started pumping away. It wasn’t long before I discovered the problem; someone had used a heavy paper towel and flushed it down the head, which got imbedded and jammed in the pump’s impeller. Once this got cleared out, resetting the breaker and running the head pump was good as new. I have to post instructions above the head If it didn’t go in your head (mouth) it doesn’t go in the boat’s head (toilet).

Having resolved the head issue, I felt pretty good about my abilities to ward off a mutiny. As we left the gas dock and returned to the slip, I saw a more-accepting Alice. She helped with the lines, took direction during mooring and was an equal crew-member. Out comes the camera and MORE PICTURES. I guess Vintage Viking got her seal of approval.

On the way home, I took my crew out for a nice dinner. Where else; Captain’s Inn in Forked River. Fine end to a finer day.

Sunday, January 4, 2009

Shake Down Cruise 10-19-08 Day 2






After what turned out to be one of the most peaceful nights sleep, I awoke at 4:00 am Sunday to a slight breeze coming in the hatch of the dining settee, a 'clanging' from the rigging of a sailboat four slips down, and the bells of the Mantoloking Bridge immediately outside the marina gates. I got up and made breakfast; dinner rolls from the night before warmed in the galley oven, cold orange juice, hot tea and cereal. The only thing missing was the Sunday morning newspaper (note to self; more reading material). The small TV I had brought on board the day before worked fine, just no TV reception. DVD only. I am going to get VERY used to this lifestyle.




But I wasn't here to watch TV. After finishing breakfast, I made another large mug of hot tea, and began going over the systems of Vintage Viking that either the surveyor couldn't due to lack of shore power or only did cursory reporting. Up to now, all of the 'major' systems functioned on the boat (engines, trannys, propulsion) but the electronics were uncalibrated and unreliable. I had brought along a handheld GPS, which worked perfect. But ever since I entered the shallower Barnegat Bay, the depth sounders didn't keep accurate reportings. I believe it is just a sensitivity setting that I need to sort out.




Most of the interior systems of the boat were functional but ill-kept. I spent the next 3 hours cleaning the head, galley and salon. Checked out the AC, the heat, the water tanks and systems, cleaned the helm and inventoried the engine room. I have a solid boat under me; not too big and not too small. But even so, there were hundreds of things that I needed to review, familiarize myself with and develop a plan for refurbish/retrofit. But for now, I wanted to get Vintage Viking to the marina in Barnegat.





By 8:00 am, I had stowed the power cords and the water lines that had given Vintage Viking life the afternoon before. The wind, still coming from the north-west, had picked up again and was approaching the 25MPH from the day before. However, since the Bay was more protected from the wind by the barrier islands, the waves were a mild 2-3', but they did have white caps on them. I pulled out of Hinckleys, confident in the boat's ability to reach my destination, but cautious of the electronics aboard. This concern would prove to be well-founded, as the sensitivity of the depth reporting continued. But Barnegat Bay is well marked with daymarkers, and with chart in hand and eyes on the depth marking of the chart, it was a process of heading southbound from one daymarker to the next. Vintage Viking had no problems dealing with the wind and waves. The only casualty was I had lost my Life is Good Kayaker's hat when I stuck my head out of the flybridge to verify a number on a daymark. Fittingly, the hat was the one I had given my brother Tom, who when he was alive used to love the water and kayaking. I'm sure he is wearing the hat now.




Even with the wind, the waves and the anxiety over the depth recording, I was very comfortable and confident on the boat. She didn't prove to be too much boat for one person to operate, at least until docking procedures called for additional hands. Up till now I had the luxury of dock attendants, gas-pumpers, or anyone else around. I hoped that as I got used to the boat I could develop procedures and systems for 'self-docking' as I do with my 20-footer. But this is almost twice the boat, four times heavier, and only operated from up on the flybridge. By the time I could leave the helm to attend to a line, the boat could be 25 feet or more away. I guess I'll need a Second Mate. I think my grandson Dominic has his eyes set on that job.





By 10:00 am, I saw Barnegat Lighthouse to port, meaning that my new marina would be to starboard. At 10:30am, I pulled Vintage Viking up to the fuel dock at Sun Harbor Bay Club for the first (but surely not the last) time. Once again, I topped off her tanks, another $200. Gas was selling for $4.00 a gallon on the water in October '08, so I estimate that the boat was burning between 20 and 25 gph. Not unrealistic for the age and size of the boat. Refurbishing the engines over the next haul-out will help to improve this. With the help of the marina owner and his son, I moved Vintage Viking into her new slip at the marina. Crosswinds, tight turning space, and the fact that she is the LARGEST boat in the marina didn't keep me from placing her in the slip on the first try. Almost like I knew what I was doing (LOL). I was like the proud father, showing off his newborn in the nursery. A few more pictures to mark the occasion. If only I had cigars to pass out!



There will be much to do to bring Vintage Viking back to her glory. But she is a classic and solid vessel, well worth the time and effort. Not many boats have her lines and heritage. She has a rather unique layout for her breed, with a forward master stateroom, head with separate shower stall to starboard, a dinette/settee to port that drops to a double bed. This area could also be converted to a second stateroom with little effort. Up three steps into the salon has a galley to starboard, with plenty of natural light and ventilation from the salon slider windows and front windshield. To port is a couch/pull out bed.
Until next time...................